Key Features

IP66 system protection

Benefits

• Supports three-phase electrical systems at 380 / 400 V
• Allows PV and battery connection within the stated SigenStor architecture
• Backup output specification is included for load-side continuity planning

Technical Summary

Sigenergy SigenStor EC 10.0 TP three-phase energy controller. Nominal output power 10,000 W; maximum output apparent power 11,000 VA; nominal output current 15.2 A; max output current 16.7 A. PV input: max 16,000 W, max DC input voltage 1100 V, nominal DC input voltage 600 V, start-up voltage 180 V, MPPT range 160 to 1000 V, 3 MPPTs, 1 PV string per MPPT, max input current 16 A per MPPT and max short-circuit current 20 A per MPPT. Backup output: 380 / 400 V, 50 / 60 Hz, THDv < 2%, peak output power 15,000 W for 10 seconds, disruption time 0 ms. Battery connection: SigenStor BAT 5.0 / 8.0, 1 to 6 modules per controller, 600 to 900 V. General data: dimensions 700 x 300 x 260 mm, weight 36 kg, operating temperature -30 to 60 °C, IP66, smart air cooling.

Installation Notes

Use within the stated operating range of -30 to 60 °C and relative humidity 0% to 95%. The datasheet notes 0 ms backup switch disruption time; backup functionality references Sigen Energy Gateway and Sigen Battery in the source notes. Battery modules listed are SigenStor BAT 5.0 / 8.0, with 1 to 6 modules per controller.

Efficiency

Maximum efficiency is 98.3% and European efficiency is 97.5% for the 10.0 TP variant. The datasheet also states a DC/AC ratio up to 1.6.