Dyness 100kWh All-in-one Unit

Dyness SKU: Dyness-DH100F-100kWh

More Details

The Dyness 100kWh All-in-one Unit offers a robust energy storage solution, perfect for residential and commercial needs. Its integrated design simplifies installation, while the smart management system enhances efficiency. Enjoy energy independence and sustainability by effectively managing your energy consumption with this high-capacity unit.

Documents

Dyness 100kWh All-in-one Unit

The Dyness DH100F-100kWh is an all-in-one PV+ESS energy storage system with air cooling and LFP battery technology. It is specified for grid and off-grid operation, with PV access, generator access and 100kWh system capacity.

Key Features
All-in-one PV+ESS system

Integrated energy storage system with PV and generator access, and grid-to-off-grid switching.

100kWh system capacity

Model-specific 100kWh capacity with 280Ah LFP battery architecture.

Dual MPPT PV input

Two MPPT paths with PV input voltage range of 300~1000V and PV max input power of 35kW ×2.

AC rated output

AC rated power of 50kW at 230/400V, 3P+N+PE, 50Hz/60Hz.

Environmental and protection rating

IP55 enclosure with C3 anti-corrosion grade, air cooling and operating temperature range of -20~50?.

Benefits
  • Supports self-consumption and peak shaving use cases.
  • Modular design and backward/bottom output may help reduce infrastructure cost.
  • Active firefighting remains effective during a power outage.
  • Suitable where a large-capacity integrated storage system is required.
Technical Summary

DH100F-100kWh all-in-one air cooling energy storage system. Battery type: LFP (280Ah). System capacity: 100kWh. AC rated power: 50kW. AC rated voltage: 230/400V. Wiring: 3P+N+PE. Frequency: 50Hz/60Hz. PV input voltage: 300~1000V. PV max input power: 35kW ×2. MPPT paths: 2. Ingress protection: IP55. Anti-corrosion grade: C3. Cooling: air cooling. Communications: Ethernet/RS485/CAN/USB.

Installation Notes

Lifting ring is not included in the dimension specification. Elevation derating applies above 2000m. Dimensions are 1200 × 1048 × 2258 mm. Approximate weight is 1650kg, marked as tentative data.

Efficiency

Uses LFP battery chemistry with 280Ah cells, air cooling and EMS intelligent control. Supports PV self generation and consumption.

Capacity (kWh)

86

Manufacturer

Dyness

Commodity Code

8507600090

Dimensions (mm) (H x W x D)

1360x1430x2560

Inverter Power (kW)

50

IP Rating

IP55

Weight (kg)

1610

PDF Icon

DynessDH100FdatasheetEN

Write Your Own Review
You're reviewing: Dyness 100kWh All-in-one Unit
loader
Loading...

check-circle You submitted your review for moderation.